Seat Heating Elements Z6/Z8, Vehicles With Seat Ventilation

Seat Heating Elements Z6/Z8, Vehicles with Seat Ventilation

Includes Driver seat heating element (Z6) / front passenger seat heating element (Z8)

Removing






- Separate the seat cover from the seat cushion. Refer to => [ Seat Cover and Seat Cushion - Standard Seat, Separating and Connecting ] Seat Cover and Seat Cushion - Standard Seat, Separating and Connecting.

- Vehicles with a front passenger seat occupant sensor: loosen the passenger occupant detection sensor - 3 - carefully from the heating element - 1 -.

- Loosen the heating elements - A -, - B - and - C - carefully from the adhesive.

- Cut the connecting pieces - arrows - and remove the heating elements.

• The old heating elements - D - remain on the cushion - 2 - and will be covered over by the new heating element.

Installation

- Align the new heating elements on the seat cushion.

- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.

- Glue the heating elements in the following sequence: - A through D -. Make sure there are no wrinkles.

- Route the connecting wires to the individual heating elements in the base of the gaps.

Further installation is performed in the reverse order of removal.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Heating and Backrest Heating Assembly Overview - Vehicles with Seat Ventilation ] Seat Heating and Backrest Heating Assembly Overview - Vehicles With Seat Ventilation.