Rear Seat Bench Cover and Cushion, Separating and Connecting

Rear Seat Bench Cover and Cushion, Separating and Connecting

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing






- Remove rear seat bench. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Cut the upholstery clips. Refer to => [ Rear Seat Bench Cover and Cushion ] Rear Seat Bench Cover and Cushion all the way around the seat frame with piers.

- Remove the seat cover and seat cushion from the seat frame.

- Vehicles with seat heating: free up the seat heating connector

- Pull off seat cover - 1 - from the seat cushion - 3 - as far as possible and cut upholstery clips - 2 - using pliers.

- Remove the seat cover from the opening for the seat belt latch - arrow -.

- Seat cover with heating element: carefully loosen the heating element from the bonding and remove it.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Seat Bench Cover and Cushion Assembly Overview ] Rear Seat Bench Cover and Cushion Assembly Overview.