Memory Positioning Switch: Service and Repair

Seat Memory Program Control (E97)/(E277)

Removing






- Remove the trim from the interior door mechanism..

- Push the tab - 3 - slightly to the rear and remove the control head - 1 - from the mount at the same time in - direction of arrow -.

- Disconnect the electrical connector - 2 -.

- Remove the control head.

Installing






Install in reverse order of removal. Note the following:

- Connect the connectors.

- Place the control head - 1 - on the mount - 2 - and push on it until the tab - 4 - clicks into place - arrow -.

• The guide - 3 - must slide downward behind the mount.

- Install the trim for the interior door mechanism..