Operation CHARM: Car repair manuals for everyone.

Radio RMC Plus (8DP) Connectors







Radio RMC Plus (8DP) Connectors






1 Connection (DAB) Antenna Amplifier 3 (R112) ( Digital Radio Antenna (R183) )

2 Not Assigned

3 Connection Block With Four Multi-Pin Connectors

4 Most Bus (T2aw)

5 4-Pin Connector (T4z) To The External Audio Source Connection (R199)

6 4-Pin Connector (T4df) To The Front Information Display Control Head (J685)

7 (AM/FM/FM2) Antenna Connection

Unlisted connector terminals are not used.

3 - Connection Block With Four Connectors

A - 8-pin connector (T8e)





1. Right rear speaker (+)

2. Right front speaker (+)

3. Left front speaker (+)

4. Left rear speaker (+)

5. Right rear speaker (-)

6. Right front speaker (-)

7. Left front speaker (-)

8. Left rear speaker (-)


B - 12-pin connector (T12c)





1 Data to Multimedia System Control Head (E380).
2 Res BT multimedia system control head.
4 Microphone input wire (+) from the Microphone unit in front roof module (R164) ( left front microphone (R140) ).
7 Data to multimedia system control head.
8 Wake UP signal to multimedia system control head.
9 Res HU to multimedia system control head.
12 Microphone input (-) from microphone unit in front roof module (left front microphone).

C - 12-pin Connector (T12e)





All pins are connected to the External audio source connection (R199).

1. LF-In ground

2. Right LF-In

3. USB (+5 volt)

4. USB (ground)

5. iPod (ACC Power)

6. Detect

7. Left LF-In

8. LF-In ground shielding

9. FBAS wire (+)

10. FBAS wire (-)

11. iPod data

12. iPod data


D - 8-pin Connector (T8f)





9 Subwoofer (R211)
10 Center speaker (R208)
13 Subwoofer (R211)
14 Center speaker (R208)
17 Terminal 31
18 Terminal 30

E - 12-pin Connector (T12d)





7 Ring-break diagnostic cable

4 - MOST bus (T2aw)





1. Output

2. Input


5 - 4-pin Connector (T4z)





All pins are connected to the External audio source connection (R199).

1. D (+)

2. iPod recognized

3. D (-)

4. Ground


6 - 4-pin Connector (T4df)





All pins are connected to the Front information display control head (J685).

1. LVDS (-)

2. LIN

3. LVDS (+)

4. Ground


7 - AM/FM1/FM2 Antenna Connection





A Chamber 2 (AM/FM1) Antenna amplifier 2 (R111) ( Radio antenna 2 (R93) )
B Chamber 1 (FM2) Antenna amplifier (R24) ( Antenna (R11) )