Diagram 42/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Lane change assistance control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Control Modules in Rear Part Of Vehicle

J769 - Lane change assistance control module Control Modules in Rear Part Of Vehicle Lane Assist System

ST4 - Fuse panel 4

SF8 - Fuse 8 (on fuse panel F) Overview Of Fuses

T12t - 12-pin connector Lane Change Assistance Control Module -J769-

T32b - 32-pin connector Locations

(51) - Ground connection in luggage compartment, right

(386) - Ground connection 21 (in main wiring harness)

(387) - Ground connection 22 (in main wiring harness)

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Avant

*3 - Through February 2011

*4 - Data bus wire (CAN bus)

Next Diagram 42/3 (Tracks 15-28)