Diagram 16/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery monitoring control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator

J367 - Battery monitoring control module Control Modules in Rear Part Of Vehicle

J532 - Voltage stabilizer Control Modules in Rear Part Of Vehicle

J533 - Data bus on board diagnostic interface Control Modules in Rear Part Of Vehicle

SB1 - Fuse 1 (on fuse panel B) Overview Of Fuses

ST1 - Fuse panel 1

ST2 - Fuse panel 2

SB9 - Fuse 9 (on fuse panel B) Overview Of Fuses

T2a - Double connector Locations

T12p - 12-pin connector

T17a - 17-pin connector, Left plenum chamber E-box connector station Overview of Connector Stations

T32b - 32-pin connector Locations

(376) - Ground connection 11 (in main wiring harness)

(688) - Ground connection 2 on center tunnel

(B710) - LIN bus connection 5 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles with Stop/Start system

*3 - Refer to applicable engine wiring diagram

Previous Diagram 16/13 (Tracks 155-168)

Next Diagram 16/15 (Tracks 183-196)