Diagram 16/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Extended CAN bus high wire junction, Extended CAN bus low wire junction





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J769 - Lane change assistance control module Lane Assist System Control Modules in Rear Part Of Vehicle

J844 - Automatic high beam assist control module Control Modules in Front Part Of Vehicle

J854 - Left front seat belt tensioner control module Locations Control Modules in Front Part Of Vehicle

J855 - Right front seat belt tensioner control module Locations

T4ac - 4-pin connector Locations

T4x - 4-pin connector Locations

T8a - 8-pin connector

T12t - 12-pin connector Lane Change Assistance Control Module -J769-

T46a - 46-pin connector Overview of Connector Stations

TV41 - Extended CAN bus high wire junction

TV42 - Extended CAN bus low wire junction

V470 - Electrical A/C compressor

Y7 - Automatic dimming interior rearview mirror Control Modules in Front Part Of Vehicle

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

* - Only for vehicles with lane assist

*2 - Only for vehicles with high beam assist

*3 - only for vehicles with hybrid drive

*4 - Refer to applicable high voltage system wiring diagram

Previous Diagram 16/8 (Tracks 85-98)

Next Diagram 16/10 (Tracks 113-126)