Diagram 6/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Front passenger airbag deactivation key switch, Airbag control module, Front passenger airbag -disabled- indicator lamp, Driver head curtain airbag igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E224 - Front passenger airbag deactivation key switch Locations

J234 - Airbag control module Control Modules in Front Part Of Vehicle Locations

K145 - Front passenger airbag -disabled- indicator lamp Locations

N251 - Driver head curtain airbag igniter Locations

N252 - Front passenger head curtain airbag igniter Locations

SB1 - Fuse 1 (on fuse panel B) Overview Of Fuses

ST1 - Fuse panel 1

T2ak - Double connector, on the driver head curtain airbag

T2fi - Double connector, on the front passenger head curtain airbag

T6ai - 6-pin connector

T6an - 6-pin connector

T10k - 10-pin connector

T12k - 12-pin connector, behind the glove compartment

T16 - 16-pin connector Control Modules in Front Part Of Vehicle

T17h - 17-pin connector, in the left A-pillar connector station Overview of Connector Stations

T17i - 17-pin connector, in the left A-pillar connector station Overview of Connector Stations

T17o - 17-pin connector, in the connector station, right A-pillar Overview of Connector Stations

T100 - 100-pin connector Locations

(B281) - Positive connection 5 (15a) (in main wiring harness)

* - Diagnostic connector

*2 - Not for USA

*3 - Refer to applicable wiring diagram for fuse positions

*4 - Depending on equipment

Previous Diagram 6/6 (Tracks 57-70)

Next Diagram 6/8 (Tracks 85-98)