Reduced Oil Pressure Switch (F378)

Reduced Oil Pressure Switch (F378)

Special tools, testers and auxiliary items required

• Assembly Tool (T10118)

• Socket 24 mm and Jointed Extension (T40175)

Removing

- Remove the rear engine cover - 2 - upward.






- Remove the noise insulation.

- Disconnect the electrical connector - 2 - using the (T10118).






- Remove the reduced oil pressure switch - 1 - with a (T40175).

• The installation location is shown with the supercharger removed.

Installing

Install in reverse order of removal. Note the following:

• Replace sealing ring.

- Tighten the reduced oil pressure switch. Oil Filter Housing and Oil Pressure Switch Overview.