Drive Plate With Anti-Friction Bearing

Drive Plate with Anti-Friction Bearing

Removing






- Remove the A/C compressor. Refer to => [ A/C Compressor ] A/C Compressor.

- Remove the compressor shaft drive plate. Refer to => [ A/C Compressor Drive Plate ] A/C Compressor Drive Plate.

- Remove locking ring - A -.

- Remove the drive plate - B -.

Installing

Installation is done is reverse order, observe the following:

• Replace the locking ring.

- clean the A/C compressor flange before installing the drive plate.

- Install the drive plate on the A/C compressor flange.

• (fitting must be possible without much force).

- Insert the locking ring - A - on the proper side.

• The side with beveled insertion edge - C - faces away from the A/C compressor (install flat side facing compressor).