Bracket For Control Motor (V239)

Bracket for Control Motor (V239)

Removal






- Remove the left rear air door motor. Refer to=> [ Left Rear Air Door Motor (V239) ] Left Rear Air Door Motor (V239).

- Expose the wiring harness - 2 -.

- Unscrew the bolts - 1, 3, 4 -.

- Remove the bracket - 5 -.

Installation

Installation is done in reverse order, observe the following:

• Tightening specification, refer to=> [ Comfort Version - Add On Parts of the A/C Unit Overview ] Comfort Version - Add On Parts of the A/C Unit Overview.

- Install the wiring harness in the mounts so that it cannot come in contact with any moving parts (for example, the lever of the control motor).

- Install the left rear air door motor. Refer to=> [ Left Rear Air Door Motor (V239) ] Left Rear Air Door Motor (V239).

After completion of the repair work, perform the following work on the control head using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function:

- Read out the event memory and erase any displayed entries.

- Perform the basic setting.

- Perform the output diagnostic test mode.