Instrument Cluster Gap Cover

Instrument Cluster Gap Cover

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Move the steering wheel as far down as possible.

- Remove the instrument panel gap cover. Refer to => [ Instrument Panel Gap Cover ] Instrument Panel Gap Cover.

- Remove the bolts - 1 - and - 3 -.

- Carefully unclip the gap cover - 2 - off the top of the steering column switch module - arrow A -.

- Unclip the instrument cluster cover from the instrument panel using a trim removal wedge (3409) - B arrows -.

- Remove the cover.

Installation

Installation is performed in the reverse of removal, but note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Steering Column Switch Module Trim Assembly Overview ] Steering Column Switch Module Trim Assembly Overview.