LED Headlamp Power Output Module 2 Right/Left (A28)/(A32)

LED Headlamp Power Output Module 2 Right/Left (A28)/(A32)

Removing






- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Remove the bolts - arrows -.

- Remove the power output stage - 4 -.

- Press the release - 1 - and disconnect the connector - 2 -.

- Remove the power output stage.

Installing

• Tightening specification, refer to => [ LED Headlamp Overview ] LED Headlamp Overview.

Install in reverse order of removal. Note the following:

- Check the seal - 3 - for damage.

- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.