Turn Signal Lamp: Service and Repair

Exterior Mirror Turn Signal Lamps

Removing






- Remove the exterior rearview mirror housing..

- Remove the bolts - arrows -.

- Remove the turn signal bulb - 1 - from the exterior rearview mirror housing - 2 - downward.

Installing






• Tightening specifications, refer to => [ Exterior Rearview Mirror Turn Signals Overview ] Service and Repair.

Install in reverse order of removal. Note the following:

• The entire exterior mirror turn signal must be replaced if an LED is faulty.

- Insert the tip of the turn signal into the slot - arrow - inside the housing - 3 -. The guide - 2 - must engage into the mount - 1 - at the same time.

- Install the turn signal - 5 - into the housing. Make sure the guide nut fits into the guide - 4 -.

- Install the exterior rearview mirror housing..