Manifold Pressure/Vacuum Sensor: Service and Repair

Intake Air Temperature Sensor (G42)/Manifold Absolute Pressure Sensor (G71)

Removing






- Remove the rear engine cover. Refer to => [ Engine Covers ] Service and Repair.

- Disconnect the connector - 1 -.

- Remove the bolts - arrows - and then remove the Intake Air Temperature (IAT) sensor (G42) / Manifold Absolute Pressure (MAP) sensor (G71).

Installing

Install in reverse order of removal. Note the following:

• Tightening specification, refer to => [ / - Tightening Specification ] Service and Repair.

• Replace the O-rings.