Diagram 3/23 (Tracks 295-308)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oxygen sensor after three way catalytic converter, Engine control module, Heater for oxygen sensor 1 after catalytic converter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen sensor after three way catalytic converter Locations

G131 - Oxygen sensor 2 after catalytic converter Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

T4l - 4-pin connector, on the oxygen sensor after the catalytic converter

T4m - 4-pin connector, on the oxygen sensor after the catalytic converter

T94 - 94-pin connector Locations

Z29 - Heater for oxygen sensor 1 after catalytic converter Locations

Z30 - Heater for oxygen sensor 2 after catalytic converter Locations

(D115) - Connection 13 (in engine compartment wiring harness)

* - from June 2011

Previous Diagram 3/22 (Tracks 281-294)

Next Diagram 3/24 (Tracks 309-322)