Diagram 3/26 (Tracks 337-350)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuel gauge, Fuel level sensor 2, Instrument cluster control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel level sensor Locations

G1 - Fuel gauge

G169 - Fuel level sensor 2 Locations

J285 - Instrument cluster control module Control Modules in Front Part Of Vehicle

T6aq - 6-pin connector

T17h - 17-pin connector, in the left A-pillar connector station Overview of Connector Stations

T17o - 17-pin connector, in the connector station, right A-pillar Overview of Connector Stations

T32 - 32-pin connector Locations

Y24 - Display unit in instrument cluster

(411) - Sensor ground connection 2 (in main wiring harness)

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

* - Data bus wire (CAN bus)

Previous Diagram 3/25 (Tracks 323-336)

Next Diagram 3/27 (Tracks 351-364)