With Headlamp Assistant

With Headlamp Assistant

Removing






- Uncle the lower cover - 2 - - arrow -.

- Disconnect and free up the connector - 1 -.

- Turn the base of the interior rearview mirror counter-clockwise and remove it from the retaining plate.






- Release the retaining tabs - 1 - and - 2 - with a screwdriver - 3 -.

- Disengage the rear cover - 4 - - arrows -.

- Release the tabs - arrows - and carefully fold the upper cover - 2 - upward just a little.






- Disengage the retainer - 1 - on the front cover - 3 -.

- Remove the upper cover.

- Disengage the retaining hooks in the - direction of the arrow - and remove the front cover - 2 - downward from the guide bars - 1 - on the interior rearview mirror base.






- Release the retaining clips - 2 - - arrows - and remove the humidity sensor - item 4 - from the interior rearview mirror base - 1 -.






- Disconnect the electrical connector - 3 -.

Installing

• Tightening specification, refer to => [ Headlamp Assistant, Humidity Sensor and Lane Assist Overview ] Headlamp Assistant, Humidity Sensor and Lane Assist Overview.

Install in reverse order of removal. Note the following:

- Install the interior rearview mirror.