Air Spring Overview

Air Spring Overview






1 Spring Washer

2 Wheel Bearing Housing

3 Stone Protection Plate

4 Air Spring

• Removing and installing, refer to => [ Air Spring ] Rear Suspension.

• Note installed position. Refer to => [ Air Spring Installed Position ].

5 Air Line

• Tightening specification for the connector: - item 3 - => [ (Item 3) Rear Air Spring Connecting Piece ] Air Line Connecting Pieces Tightening Specification.

Air Spring Installed Position





• The positioning pin - 3 - on the air spring must fit into the hole - 5 - in the stone chip protection and into the hole - 4 - in the wheel bearing housing.

• The hooks - 2 - must lock onto the lower wheel bearing housing.

• The spring washer - 1 - must be pushed on parallel up to the base of the air spring.

• The positioning pin - 6 - on the air spring must be installed correctly inside the body.