Selector Lever Sensor System Control Module (J587)

Selector Lever Sensor System Control Module (J587)

Removing

- Remove the selector lever handle. Refer to => [ Selector Lever Handle ] Selector Lever Handle.

- Remove the multimedia system control head (E380).

- Disconnect the connector - 1 -.






- Open the four tabs - arrows - and remove the selector lever sensor system control module - 2 - upward.

Installing

Install in reverse order of removal. Note the following:

- Let the selector lever sensor system control module latch with the four tabs.

- Install the multimedia system control head.

- Install the selector lever handle. Refer to => [ Selector Lever Handle ] Selector Lever Handle.