Center Differential Housing Overview

Center Differential Housing Overview

• General repair instructions, refer to => [ Repair Information ] Repair Information.

• Rules for cleanliness when working on the S-Tronic transmission, refer to => [ Clean Working Conditions ] Clean Working Conditions.






1 Bolt

2 Bolt

• Aluminum bolts

• Quantity: 11

3 Housing

• For the center differential

• Removing and installing, refer to => [ Center Differential Housing, Transmission Installed ] Center Differential Housing, Transmission Installed

4 Gear Carrier

• Installed position: The tab must fit into the cut-out in the transmission housing.

5 Center Differential

6 Pressure Spring

7 Guide Sleeve

• Does not have to be installed again

8 Locking Ring

• For the transmission output shaft ball bearing with splines

9 Locking Ring

• For the transmission output shaft with splines

10 Ball Bearing

• For the transmission output shaft with splines

11 Bolt

• Steel bolts

• Quantity: 2

12 Balance Weight

• Installed depending on the version

13 Shaft Seal

14 Dust Ring

• Replace after removing

15 Transmission Output Shaft with Splines without Vibration Damper

• For the correct allocation, refer to the Parts Catalog

16 Transmission Output Shaft with Splines and Vibration Damper

• For the correct allocation, refer to the Parts Catalog

• Install the vibration damper.