Radiator Cooling Fan Control Module: Service and Repair

Coolant Fan Control Module

Removing

- Remove the front noise insulation - 1 -.






- Remove the coolant fan electrical connector - 1 - from the bracket and disconnect it by sliding the retainer back - arrow - and pressing the release down.






- Free up the electrical wiring harness to the radiator fan control module.

- Disconnect the connectors - 2 - and - 3 -.






- Remove the bolt - arrow - and the coolant fan control module - 1 -.

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Fan Shroud and Coolant Fan Overview ] Fan Shroud and Coolant Fan Overview.

- Install the front noise insulation.