B-Pillar Vent

B-pillar Vent

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Release the clip - 1 - on the top of the vent in the B-pillar with a small screwdriver.

- Carefully unclip the B-pillar vent from the upper B-pillar trim using a trim removal wedge (3409) - arrow -.

- Disconnect electrical connector and remove vent.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ B-Pillar Trim Assembly Overview ] B-Pillar Trim Assembly Overview.