Night Vision System Camera Spray Nozzle

Night Vision System Camera Spray Nozzle

Removing






- Remove the left horn. Refer to => [ Signal Horns ] Signal Horns.

- Unclip the left cover - 1 - - arrows - and remove it.

- Remove the bolts - arrows -.






- Remove the left air guide - 1 -.

• Disregard item - 2 -.

- Remove the bolts - arrows -.






- Open the clamp - 3 - and remove the windshield washer fluid hose - 2 -.

- Remove the Night vision system camera (R212) - 1 - from its retainer on the radiator grille to the left.

- Disconnect the electrical connector - 4 -.

- Remove the bolts - arrows -.






- Remove the spray nozzle - 2 - and the windshield washer fluid hose.

- Open the clip - 3 - and remove the windshield washer fluid hose - 1 - from the spray nozzle.

Installing

• Tightening specification. Refer to=> [ Headlamp Washer Fluid Reservoir, Hose and Nozzle Overview ] Headlamp Washer Fluid Reservoir, Hose and Nozzle Overview.

Install in reverse order of removal. Note the following:

- Install the night vision system camera.

- Install the horn. Refer to => [ Signal Horns ] Signal Horns.