Rear Lid Trim Assembly Overview

Rear Lid Trim Assembly Overview






1 Warning triangle

2 Bracket

• For the warning triangle

• Removing and Installing, refer to => [ Warning Triangle Bracket ] Warning Triangle Bracket

• Insert and press on it until it audibly latches

3 Bracket

• For rain shield

• If equipped

• Removing and Installing, refer to => [ Umbrella Bracket ] Umbrella Bracket

• Insert in the trim and press on it until it engages audibly

4 Trim

• For rear lid lock

• Removing and Installing, refer to => [ Rear Lid Latch Trim Panel ] Rear Lid Latch Trim Panel

• Press on it until it clicks into place

5 Rear lid trim

• Removing and Installing, refer to => [ Rear Lid Trim ] Rear Lid Trim

6 Expanding clip

• Quantity: 2

7 Wiring guide

• Quantity: 2

• Removing and Installing, refer to => [ Wiring Guide ] Wiring Guide

8 Rear lid

9 Clips

• Quantity: 12

• Remove clips left in the mounting points of the rear lid and use for installation in the trim

• Replace damaged or deformed clips.

• Install in the trim

10 Bolt

• 1.7 Nm