Rear

Window Shaft Strip

Special tools, testers and auxiliary items required

• Removal tool (T40219)

Preparing the removal tool (T40219) :






• To remove the window shaft strip, pull the disassembly tool (T40219) carefully at the marked location - arrow - so that it can be inserted behind the strip.

Removing






- Remove the window frame trim..

- Remove the inner window shaft strip from the door shell.

- Insert the disassembly tool (T40219) next to the guide- 4 - for the window shaft strip - 3 - and hold it on the strip - 2 -.

• The front section - 1 - of the disassembly tool (T40219) must be installed as illustrated.

- Push the disassembly tool (T40219) gently in - direction of arrow - to release it.

• The retaining strip must audibly unlock.

- Remove the window shaft strip upward from the door fold using the disassembly tool (T40219).

- Remove the window shaft strip.

Installing






Install in reverse order of removal. Note the following:

- Position the window shaft strip - 1 - on the door fold and press on it evenly - arrows A -. When doing this, the strip - 2 - must audibly engage.

• The retaining strip must fit - arrow - under the retaining plate - 3 -.