Front Wheel Housing Liner Rear Section

Front Wheel Housing Liner Rear Section

Removing






• The front wheel is removed.

- Loosen the quick-release bolts - 6 -.

- Remove the bolts - 2 - and - 5 -.

- Disengage the bracket - 3 - from the fender.

- Remove the nuts - 1 -.

- Remove the wheel housing liner - 4 -.

Installing

• Tightening specifications, refer to => [ Front Wheel Housing Liners Assembly Overview ] Description and Operation.

Install in reverse order of removal. Note the following:

- Make sure the clip is secure after installing it.