Instrument Panel Cover Trim Molding

Instrument Panel Cover Trim Molding

Removing






- Remove the instrument panel top cover. Refer to => [ Instrument Panel Upper Cover ] Instrument Panel Upper Cover.

- Remove the bolts - 1 through 3 -.

- Remove trim molding - 4 - from the instrument panel cover - 5 -.

Installing

Install in reverse order of removal. Note the following:

- Tighten the bolts in the following sequence: - 1, 2 and 3 -.

Installation note: For example tightening specifications, replace components => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.