Mirror Adjusting Unit Mount

Mirror Adjusting Unit Mount

Removing






- Remove the door trim..

- Remove the window frame trim..

- Cut through cable tie - 3 -.

- Remove the clip - 2 - and disconnect the connector - 1 -.

- Remove the sealing plugs - 1 - and - 4 -.






- Pull off the window guide - 2 - in the area near the bolt.

- Remove the bolts - arrows -.

- Remove the mirror adjusting unit mount while guiding the grommet - 3 - and the wiring harness out through the body opening.

Installation

• For the correct tightening specifications, refer to => [ Exterior Mirror Assembly Overview ] Exterior Rearview Mirror Overview.

Installation is reverse of removal, but note the following:

- Install the window frame trim..

- Install the door trim..