Backrest Assembly Overview

Backrest Assembly Overview






1 Seat Pan

2 Bolt

• Quantity: 4

• Self-locking

• Replacing

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

3 Trim

• For backrest hinge trim on tunnel side

• Removing and Installing, refer to => [ Backrest Hinge Trim ] Backrest Hinge Trim

4 Backrest

• Removing and Installing, refer to => [ Backrest ] Backrest

5 Headrest

• Manually adjustable version

• Removing and Installing, refer to => [ Manually Adjustable Headrests ] Manually Adjustable Headrests

• Electrically adjustable version

• Removing and Installing, refer to => [ Power Headrests ] Power Headrests

6 Clip

• With hooks

• Quantity: 2

7 Backrest cover

• Removing and Installing, refer to => [ Backrest Cover ] Backrest Cover

8 Rubber strap

• With hooks

• Quantity: 2

9 Trim

• For sill side backrest hinge

• Removing and Installing, refer to => [ Backrest Hinge Trim ] Backrest Hinge Trim

10 Expanding Rivet

11 Wiring Harness

• From the side airbag to the connector station

• depending on optional equipment, there may be more wiring harnesses, such as for the backrest heating, lumbar support

12 Bolt

• 10 Nm

13 Belt guide

• Removing and Installing, refer to => [ Seat Belt Guide ] Seat Belt Guide