Front Seat Switch Module 2 E667/E668

Front Seat Switch Module 2 E667/E668

Driver seat switch module 2 (E667) / front passenger seat switch module 2 (E668)

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Remove the trim on the sill side. Refer to => [ Sill-Side Trim with Front Trim ] Sill-Side Trim with Front Trim.

- Carefully unclip rocker - 1 - from the switch module using the trim removal wedge (3409).

- Remove the screws - 1 - and the switch module - 2 -.






Installing






Install in reverse order of removal. Note the following:

- Insert trim with the tabs - 1 - in the grooves - 2 - on the switch module and press on it until it engages audibly.

Installation note: For example tightening specifications, replace components => [ Seat Adjustment Control Head/Switch Module Operation Assembly Overview ] Seat Adjustment Control Head/Switch Module Operation Assembly Overview.