Lumbar Support Adjustment Switch E176/E177

Lumbar Support Adjustment Switch E176/E177

Driver seat lumbar support adjustment switch (E176) / front passenger seat lumbar support adjustment switch (E177)

Removing






- Remove the trim on the sill side. Refer to => [ Sill-Side Trim with Front Trim ] Sill-Side Trim with Front Trim.

- Disconnect the connector - 4 -.

- Remove the bolts - 2 -.

- Remove - 1 - from the trim - 3 -.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Seat Adjustment Control Head/Switch Module Operation Assembly Overview ] Seat Adjustment Control Head/Switch Module Operation Assembly Overview.