46-Pin Connector Mount, CAN Cut-Off Connector

46-Pin Connector Mount, CAN Cut-Off Connector

Removing






- Remove Fuse panel F (SF). Refer to => [ Fuse Panel F ] Fuse Panel F.

- Slide the locking lever - 2 - into the "open" position - arrow -.

- Press the release - 1 - and push the mount - 3 - toward the rear.

Installing






Install in reverse order of removal. Note the following:

- Slide the locking lever - 1 - on the mount into the "closed" position.

• Both markings - arrows - must align.

- Install the fuse panel F. Refer to => [ Fuse Panel F ] Fuse Panel F.