Diagram 3/35 (Tracks 463-476)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Humidity sensor, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G355 - Humidity sensor Control Modules in Front Part Of Vehicle A/C System Control Components Inside Pass Compartment

J386 - Driver door control module Control Modules in Front Part Of Vehicle Locations

J387 - Front passenger door control module Control Modules in Front Part Of Vehicle Locations

T8v - 8-pin connector

T20b - 20-pin connector Driver's Door Control Module -J386-

T20c - 20-pin connector Front Pass Door Control Module -J387-

T23a - 23-pin connector, on the left A-pillar

T23b - 23-pin connector, on the right A-pillar

T27a - 27-pin connector, on the left A-pillar

T27b - 27-pin connector, on the right A-pillar

Y7 - Automatic dimming interior rearview mirror Control Modules in Front Part Of Vehicle

(B427) - Mirror auto-dimming signal connection 1 (in main wiring harness)

(B428) - Mirror auto-dimming signal connection 2 (in main wiring harness)

(B668) - CAN bus extended high connection 2 (in main wiring harness)

(B669) - CAN bus extended low connection 2 (in main wiring harness)

* - Only for vehicles with a humidity sensor

*2 - from June 2011

Previous Diagram 3/34 (Tracks 449-462)

Next Diagram 3/36 (Tracks 477-490)