Diagram 3/48 (Tracks 645-658)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Control Modules in Right Luggage Comp.

T17k - 17-pin connector, in the connector station, right A-pillar Overview of Connector Stations

T32f - 32-pin connector Control Modules in Right Luggage Comp.

TV36 - Instrument cluster CAN bus high wire junction

TV40 - Instrument cluster CAN bus low wire junction

TV41 - Extended CAN bus high wire junction

TV42 - Extended CAN bus low wire junction

T46 - 46-pin connector Overview of Connector Stations

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B670) - CAN bus extended high connection 3 (in main wiring harness)

(B671) - CAN bus extended low connection 3 (in main wiring harness)

(B672) - Suspension/instrument cluster CAN bus high connection 1 (in main wiring harness)

(B673) - Suspension/instrument cluster CAN bus high connection 2 (in main wiring harness)

(B676) - Suspension/instrument cluster CAN bus low connection 1 (in main wiring harness)

(B677) - Suspension/instrument cluster CAN bus low connection 2 (in main wiring harness)

* - Data bus wire (CAN bus)

Previous Diagram 3/47 (Tracks 631-644)