Instrument Cluster and Analog Clock Overview

Instrument Cluster and Analog Clock Overview

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.

• All warning lamps in instrument cluster are fitted with light-emitting diodes. In case an indicator lamp is malfunctioning, the instrument cluster must be replaced.






1 Outside Air Temperature Sensor (G17)

• Removing and installing, refer to => [ Outside Air Temperature Sensor (G17) ] Outside Air Temperature Sensor (G17).

2 Electrical Connector

• For the Outside air temperature sensor (G17).

3 Oil Level Thermal Sensor (G266)

4 Oil Pressure Switch (F1)

5 Windshield Washer Fluid Level Sensor (G33)

• Removing and installing, refer to => [ Windshield Washer Fluid Level Sensor (G33) ] Service and Repair.

6 Analog Clock (Y)

• Removing and installing, refer to => [ Analog Clock (Y) ] Procedures.

7 Instrument Cluster

• With the Instrument cluster control module (J285).

• Removing and installing, refer to => [ Instrument Cluster with Instrument Cluster Control Module (J285) ] Service and Repair.

• Multi-pin connector pin assignment, refer to=> [ Instrument Cluster Multi-Pin Connector Assignment ] [1][2]Diagrams.

8 Fiber Optic Cable Connector

• Attach with the cable connector protective cap (VAS 6223/9).

9 Electrical Connector

• For instrument cluster.

10 Screw

• 3 Nm

11 Screw

• 3 Nm

12 Fuel Level Sensor (G)

• Removing and installing,

13 Fuel Level Sensor 2 (G169)

14 Rear Brake Pad Wear Sensor

• Left rear brake pad wear sensor (G36) , Right rear brake pad wear sensor (G37)

15 Brake Fluid Level Warning Switch (F34)

16 Front Brake Pad Wear Sensor

• Left front brake pad wear sensor (G34) , Right front brake pad wear sensor (G35).

17 Engine Coolant Level Warning Switch (F66)