High-Intensity Gas Discharge Lamp Control Module (J343)/(J344)

High-Intensity Gas Discharge Lamp Control Module (J343)/(J344)

Danger to life due to high voltage.

• Always disconnect the battery wire strap before working on gas-discharge headlamp components marked with yellow high-voltage symbols.

Removing






- Remove headlamp housings, refer to => [ Headlamp Housing ] Headlamp Housing.

- Remove the bolts - arrows -.

- Remove the control module - 1 - from the headlamp housing.

- Press the tab - 5 - and disconnect the adapter wire - 2 -.

- Disconnect the electrical connector - 3 -.

- Remove the control module.

Installing

• Tightening specification, refer to => [ HID Headlamps Overview ] HID Headlamps Overview.

Install in reverse order of removal, observing the following:

- Make sure the seal - 4 - between the control module and the headlamp housing is not damaged.

- Install the headlamp housing, refer to => [ Headlamp Housing ] Headlamp Housing.