Diagram 1/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Knock sensor 1, Knock sensor 2, Knock sensor 3, Knock sensor 4, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G61 - Knock sensor 1 Locations

G66 - Knock sensor 2 Locations

G198 - Knock sensor 3 Locations

G199 - Knock sensor 4 Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

T3ai - 3-pin connector, on the knock sensor 4

T3u - 3-pin connector, on the knock sensor 1

T3v - 3-pin connector, on the knock sensor 2

T3z - 3-pin connector, on the knock sensor 3

T105 - 105-pin connector Engine Control Module (ECM) -J623-

(220) - Sensor ground connection (in engine compartment wiring harness)

Previous Diagram 1/12 (Tracks 141-154)

Next Diagram 1/14 (Tracks 169-182)