Diagram 1/20 (Tracks 253-266)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Map controlled engine cooling thermostat, Engine control module, Left electrohydraulic engine mount solenoid valve, Intake manifold tuning valve, Transmission mount valve 1, Intake manifold runner control valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F265 - Map controlled engine cooling thermostat Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

N144 - Left electrohydraulic engine mount solenoid valve Locations

N145 - Right electrohydraulic engine mount solenoid valve Locations

N156 - Intake manifold tuning valve Locations

N262 - Transmission mount valve 1

N263 - Transmission mount valve 2

N316 - Intake manifold runner control valve Locations

T2bw - Double connector

T2bx - Double connector

T2dk - Double connector

T2dl - Double connector

T2fs - Double connector

T2ge - Double connector

T2gf - Double connector

T14d - 14-pin connector, in the engine compartment, left

T91 - 91-pin connector Engine Control Module (ECM) -J623-

T105 - 105-pin connector Engine Control Module (ECM) -J623-

(D110) - Connection (8) (in engine compartment wiring harness)

Previous Diagram 1/19 (Tracks 239-252)

Next Diagram 1/21 (Tracks 267-280)