Diagram 1/24 (Tracks 309-322)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil pressure switch, Reduced oil pressure switch, Oxygen sensor after three way catalytic converter, Oxygen sensor 2 after catalytic converter, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F22 - Oil pressure switch Locations

F378 - Reduced oil pressure switch Locations

G130 - Oxygen sensor after three way catalytic converter Locations

G131 - Oxygen sensor 2 after catalytic converter Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

T1b - Single connector

T1d - Single connector

T4aa - 4-pin connector, near the oxygen sensor

T4z - 4-pin connector, near the oxygen sensor

T14d - 14-pin connector, in the engine compartment, left

T91 - 91-pin connector Engine Control Module (ECM) -J623-

T105 - 105-pin connector Engine Control Module (ECM) -J623-

Z29 - Heater for oxygen sensor 1 after catalytic converter

Z30 - Heater for oxygen sensor 2 after catalytic converter

(D115) - Connection (13) (in engine compartment wiring harness)

* - 0.9 bar

*2 - 2,6 bar

Previous Diagram 1/23 (Tracks 295-308)

Next Diagram 1/25 (Tracks 323-336)