Dynamic Steering Overview

Dynamic Steering Overview






1 Actuator

• The actuator and steering column are one component and are replaced together.

• Must not be loosened or removed from the steering column.

• Perform a basic setting on the system if the actuator was replaced. Refer to => [ Dynamic Steering Basic Setting ] Dynamic Steering Basic Setting.

• Steering column, removing and installing, refer to => [ Steering Column ] Steering Column

2 Active Steering Control Module (J792)

• The basic setting must be made if the active steering control module is replaced, refer to => [ Dynamic Steering Basic Setting ] Dynamic Steering Basic Setting.

• Removing and installing, refer to => [ Active Steering Control Module (J792) ] Removal and Replacement

3 Power Steering Pump

• With an electric control valve

• The power steering pump and control valve are one component and are replaced together.

• Installed position on vehicles with belt drive on the front of the engine on the left side.

• Installed position on vehicles with chain drive on the back of the engine on the left side.

• Power steering pump, removing and installing 8-cylinder, refer to => [ Power Steering Pump, With Dynamic Steering ] Power Steering Pump, With Dynamic Steering, => [ Power Steering Pump, Without Dynamic Steering ] Power Steering Pump, Without Dynamic Steering