Anti-Theft Immobilizer Reader Coil (D2), from July 2010

Anti-Theft Immobilizer Reader Coil (D2), from July 2010

Removing






- Remove the instrument panel cover in the center..

- Release the tabs - arrows - and remove the anti-theft immobilizer reader coil - 1 - from the mount.

- Disconnect the electrical connector - 2 -.

Installing

• Tightening specification. Refer to => [ Steering Column Switch Module, Electronic Ignition Lock and Induction Coil Overview ] Service and Repair.

Install in reverse order of removal. Note the following:

- Install the center instrument panel cover..