Bumper Cover Lower Section

Bumper Cover Lower Section

Removing






- Remove the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.

- Remove the bolt - 2 - (If equipped).

- Disconnect any electrical harness connectors or components (if equipped).

- Release the tabs - 1 - and remove the lower part of the bumper cover - 4 - from the bumper cover - 3 -.

Installation

• For the correct tightening specifications refer to => [ Rear Bumper Cover Assembly Overview ] Rear Bumper Cover Assembly Overview.

Installation is reverse of removal, but note the following:

- When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.