Upper Bumper Cover Mount

Upper Bumper Cover Mount

Removing






- Remove the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.

- Remove the bolts - 2 - and - 4 -.

- Remove the upper bumper cover mount - 3 -.

Installation

• For the correct tightening specifications refer to => [ Rear Bumper Cover Assembly Overview ] Rear Bumper Cover Assembly Overview.

Installation is reverse of removal, but note the following:

- Align the upper mount with the spacers - 1 - on the tail lamp assembly - arrow -.

- Install the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.