Rear Wheel Housing Liner

Rear Wheel Housing Liner

Removing






• The rear wheel is removed.

- Remove the bolts - 2 -.

- Remove the clip - 1 - from the wheel housing liner - 3 -.

- To remove the clips - 3 -, unlock the release lever - 2 - with needle nose pliers in - direction of arrow A - and push it off the pin - 1 - in - direction of arrow B -.






- Locking pliers (VAS 6199) can also be used to unlock the clips.

- Remove the wheel housing liner.

Installing

• Tightening specifications, refer to => [ Front Wheel Housing Liners Assembly Overview ] Description and Operation.

Install in reverse order of removal. Note the following:

- Make sure the clip is secure after installing it.