Front Parking Aid Sensor Trim

Front Parking Aid Sensor Trim

Removing






- Remove the front bumper cover end plate. Refer to => [ Front Bumper Cover Bottom Plate ] Front Bumper Cover Bottom Plate.

- Open the tab - 1 - and remove the parking aid sensor - 3 -.

- Release the hooks - arrows - and remove the trim - 2 - for the parking aid sensor to the rear.

Installation

Installation is reverse of removal, but note the following:

- Install the front bumper cover end plate. Refer to=> [ Front Bumper Cover Bottom Plate ] Front Bumper Cover Bottom Plate.