Upper Backrest Adjustment Pressure Distribution Plate

Upper Backrest Adjustment Pressure Distribution Plate

Removing






• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, disconnecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

- Remove the rear seat backrest. Refer to => [ Lower Seat Frame/Rear Seat Backrest ] Lower Seat Frame/Rear Seat Backrest.

- Remove backrest cover together with backrest cushion. Refer to => [ Backrest Cover with Backrest Cushion for Individual Power Rear Seat ] Backrest Cover with Backrest Cushion for Individual Power Rear Seat.

- Unclip pressure upper backrest adjustment distribution plate - 1 - from the headrest frame - arrows - by releasing retaining tabs with a screwdriver.

Installing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, connecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

• Observe all measures when installing the rear seat. Refer to => [ Lower Seat Frame/Rear Seat Backrest ] Lower Seat Frame/Rear Seat Backrest.

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Rear Upper Backrest Adjustment Assembly Overview ] Rear Upper Backrest Adjustment Assembly Overview.