Diagram 19/17 (Tracks 211-224)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Air quality sensor, A/C pressure/temperature sensor, Vehicle electrical system control module
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
G238 - Air quality sensor Components Outside Pass Compartment
G395 - A/C pressure/temperature sensor A/C Compressor and Condenser
G657 - Humidity sensor in fresh air intake duct Components Outside Pass Compartment
J519 - Vehicle electrical system control module Control Modules in Front Part Of Vehicle
ST2 - Fuse panel 2
SF11 - Fuse 11 (on fuse panel F) Overview Of Fuses
T3bd - 3-pin connector
T3be - 3-pin connector
T16c - 16-pin connector Vehicle Electrical System Control Module -J519-
T17k - 17-pin connector, in the connector station, right A-pillar Overview of Connector Stations
T17l - 17-pin connector, in 7-pin relay carrier
T17m - 17-pin connector, in 7-pin relay carrier
T32a - 32-pin connector Vehicle Electrical System Control Module -J519-
T32b - 32-pin connector Vehicle Electrical System Control Module -J519-
(43) - Ground connection on A-pillar, lower right
(376) - Ground connection 11 (in main wiring harness)
(377) - Ground connection 12 (in main wiring harness)
(381) - Ground connection 16 (in main wiring harness)
(639) - Ground connection on left A-pillar
(B280) - Positive connection 4 (15a) (in main wiring harness)
(B699) - LIN bus connection 4 (in main wiring harness)
* - Refer to applicable wiring diagram for fuse positions
*2 - from June 2011
Previous Diagram 19/16 (Tracks 197-210)
Next Diagram 19/18 (Tracks 225-238)