Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Module with Accelerator Pedal Position Sensor
Removing
- Remove the driver side lower instrument panel cover.
- Disconnect the connector - 2 - by pressing the release - 1 - up - arrow -.
- Remove the bolt - 3 - and remove the accelerator pedal module downward.
Installing
Install in reverse order of removal. Note the following:
• Tightening specification, refer to => [ Accelerator Pedal Module Overview ] Accelerator Pedal Module Overview.
- Engage the accelerator pedal module - 4 - on the bottom of the pedal bracket - 1 -, insert the centering pin - 2 - and tighten the bolt - 3 -.
- Install the driver side lower instrument panel cover.