Sidemember Trim Panel

Sidemember Trim Panel

Removing






- Remove the bolt - 3 - from the rear wheel housing liner - 4 -.

- Remove the bolts - 1 - from the rear section of the front wheel housing liner - 2 -.

- Remove the bolts - arrows -.






- Remove the expanding pins - 1 - from the clips - 2 -.

- Release the tabs - 2 - on the lever - 1 - - arrow - and on the sill panel trim - 3 - from the bracket.






- Remove the sill panel trim and lay it on a soft surface.

Installing

• Tightening specifications, refer to => [ Sidemember Trim Panel Assembly Overview ] Sidemember Trim Panel Assembly Overview.

Install in reverse order of removal. Note the following:

- Make sure the tabs in the bracket for the sill panel trim latch securely.